Analog signals pick up noise over long distances, and I2C is only for short wires. The Nuicon EE072 Humidity and Temperature Probe is a robust solution for industrial networks. Featuring a native Modbus RTU (RS485) interface, it connects directly to your PLC or SCADA system, allowing you to daisy-chain multiple probes over long distances without signal loss.
Durable Construction: Designed for dependable operation in indoor and industrial environments.
Ideal for installation in tight equipment spaces and ducts.
Stable sensing element ensures accurate long-term humidity and temperature monitoring.
Designed for dependable operation in indoor and industrial environments.
We help you map the Modbus registers to your specific controller.
We stock the EE072 Humidity and Temperature Probe in Bengaluru for urgent automation projects.
We supply the correct M12 cables and T-couplers for daisy-chaining.
Yes. You can configure the address, baud rate, and parity via software or by writing to the registers.
For long cable runs (RS485), yes. A 120-ohm resistor should be used at the end of the bus line.
Yes. The EE072 Humidity and Temperature Probe features a threaded filter cap that can be swapped if it gets clogged.
The ultra-low power version (I2C) for battery-operated IoT devices.
Need a display? The EE210 takes the same sensing tech but adds a screen and analog outputs.
Use it to spot-check your installed probes.
