Every project demands precision. Nuicon provides rugged, reliable coating thickness gauges that deliver accurate measurements in the lab, on the production line, and in the most demanding field conditions. Find your perfect match below.
Accurate coating measurement is critical for:
Ensure coating consistency and meet industry specifications (ISO, ASTM, NACE).
Verify that the coating is applied at the correct thickness to provide the intended barrier against corrosion.
Prevent the costly waste of over-application and the premature failure of assets from under-application.
Provide documented proof that coatings meet required standards for client deliverables and warranty claims.
For Heavy Industry & Shipyards, For Multi-Layer & Complex Coatings and For General Contracting & Automotive
Trust lab-grade precision; featuring 0.1μm resolution and NIST certification for critical aerospace validation.
Get into the tight spots; this pen-style probe measures inside pipes and on curved surfaces others can’t reach.
Master non-destructive testing on plastics and composites with advanced ultrasonic technology.
Work fearlessly in extreme heat; take measurements directly on surfaces up to 150°C in foundries.
Cut inspection time on rusted steel and shipyards measures up to 500μm without any surface prep.
A smart upgrade; use our durable, high-performance probes with your existing Elcometer 456 base.
Simplify quality control; its one-button operation delivers instant pass/fail results right on the line.
Maximize value without sacrifice; get dependable ±3% accuracy for everyday automotive and shop use.
Gauge for job sites; automatically identifies steel or aluminum with a single touch.
With a coating thickness gauge using magnetic, eddy current, or ultrasonic principles.
Dry Film Thickness (DFT) is the thickness of a cured coating applied to a substrate.
80% of measurements must meet or exceed the specified thickness, and none fall below 20% of it.
There is no single standard; it varies by application (e.g., automotive: ~120-180µm, industrial: 250-500µm).
Key standards include ISO 19840 for paint on steel and ISO 2360 for non-conductive coatings on non-magnetic metals.
1 mil is equal to 0.001 inches or approximately 25.4 micrometers (µm).
Our experts are here to help you choose the perfect tool based on your substrate, environment, and accuracy requirements. Contact Nuicon today for a consultation.
Phone: +91 9035754762, +91-80284 84439
Email: [email protected], [email protected]
