Stop “Sweating” Pipes Before Damage Starts. Chilled beams and cooling ceilings are efficient, but one humid day can turn them into a dripping mess. Water damage ruins false ceilings, corrodes pipes, and breeds mold. The Nuicon EE046 Condensation Monitor is your early warning defense. Designed to strap directly onto cold surfaces, it detects when humidity nears the dew point at the pipe surface. Before droplets can form, it triggers a relay to shut off cold water flow or alert your BMS. It’s the simplest, most effective way to keep your facility dry and safe.
Accurate Surface Sensing: Thermally conductive mounting ensures precise measurement directly at the pipe surface.
Detects condensation risk early and activates alarms before water forms.
Built-in LED clearly indicates normal operation, alarm status, or power issues.
Rapidly reacts to temperature changes in chilled water and HVAC systems.
A small investment in the EE046 Condensation Monitor prevents thousands in water damage repairs.
No software required. It’s a hardware-based safety switch that just works.
We stock these units in Bengaluru for urgent HVAC retrofits.
Install it on the coldest part of the pipe or surface where condensation is most likely to occur. Ensure good thermal contact.
The standard model switches at 90 ±3 %RH with 5 %RH hysteresis. The datasheet does not specify adjustable versions.
.
No. It does not measure or output room temperature. It detects condensation risk by measuring relative humidity at the surface.
The standard wall/duct transmitter for general building air quality monitoring.
Need to measure dew point in a cleanroom? The EE210 offers higher accuracy for critical zones.
The ultimate diagnostic tool. Use it to spot-check your pipes and verify dew point risks manually.
