Nuicon

EC-777E

Omniport 30 meter

Hassle-Free Measurement 0f Coating Thickness

EC-777E is backed by dual technology, i.e., it uses both eddy current and magnetic induction to measure coating thickness. A separate probe, two batteries, and a USB cable accompany the EC-777E. The probe consists of stainless steel and weighs approximately 63 grams. You can see the measurement results of this device either on your laptop or through your mobile.

EC777E Coating Thickness Gauge Nuicon

Omniport 30 with LOGPROBE20

Omniport 30 with LOGPROBE31

Omniport 30 with available probes

Omniport 30 multifunctional hand-held metre SET

Specifications

EC-777E
Probe type
Separated probe
Measuring Principle
Fe: Magnetic induction; NFe: Eddy currents
Measuring Range
0~2000μm
Accuracy
±(2%+1μm)
Resolution
0.1μm(0~100μm); 1μm(>100μm)
Display
2.4 inch color screen
Unit
μm, mm, mils, inch
Temperature Range (Operation/Storage)
(-10 to 50 °C) / (-20 to +60 °C)
Chart
Curve, bar chart or trend chart
Readings Memory
10x13x10 measurement data
Minimum measuring area
Diameter 15mm
Probe trigger mode
Mechanical trigger, trigger force: 0.4-0.8N
Minimum thickness of Substrate
Fe: 0.20mm/NFe: 0.03mm
Maximum measuring rate
2 readings
Power Supply
2pcs 1.5V AA alkaline batteries, 2pcs 1.2V AA rechargeable batteries
Size
Housing: 146X76X32mm; Wire: ⌀3.5X1000mm; Probe: ⌀17X67mm
Case
Housing: ABS; Probe: Stainless steel
Weight
Housing: about 137g(no batteries); Probe: about 63g
Standards/Certificates
CE, ROHS, ISO 2178, 2360, GB./T 4956-2003, 4957-2003, JJG-818-2005

Attributes

Gallery