Nuicon

EC-777E

Omniport 30 meter

Hassle-Free Measurement 0f Coating Thickness

EC-777E is backed by dual technology, i.e., it uses both eddy current and magnetic induction to measure coating thickness. A separate probe, two batteries, and a USB cable accompany the EC-777E. The probe consists of stainless steel and weighs approximately 63 grams. You can see the measurement results of this device either on your laptop or through your mobile.

EC-777E cover

Omniport 30 with LOGPROBE20

Omniport 30 with LOGPROBE31

Omniport 30 with available probes

Omniport 30 multifunctional hand-held metre SET

Specifications

EC-777E
Probe type
Separated probe
Measuring Principle
Fe: Magnetic induction; NFe: Eddy currents
Measuring Range
0~2000μm
Accuracy
±(2%+1μm)
Resolution
0.1μm(0~100μm); 1μm(>100μm)
Display
2.4 inch color screen
Unit
μm, mm, mils, inch
Temperature Range (Operation/Storage)
(-10 to 50 °C) / (-20 to +60 °C)
Chart
Curve, bar chart or trend chart
Readings Memory
10x13x10 measurement data
Minimum measuring area
Diameter 15mm
Probe trigger mode
Mechanical trigger, trigger force: 0.4-0.8N
Minimum thickness of Substrate
Fe: 0.20mm/NFe: 0.03mm
Maximum measuring rate
2 readings
Power Supply
2pcs 1.5V AA alkaline batteries, 2pcs 1.2V AA rechargeable batteries
Size
Housing: 146X76X32mm; Wire: ⌀3.5X1000mm; Probe: ⌀17X67mm
Case
Housing: ABS; Probe: Stainless steel
Weight
Housing: about 137g(no batteries); Probe: about 63g
Standards/Certificates
CE, ROHS, ISO 2178, 2360, GB./T 4956-2003, 4957-2003, JJG-818-2005

Attributes

EC-777E cover
  • Double principle in one, ruby probe
  • Car or general mode
  • High resolution 0.1μm

Gallery